How Does Hydroflow Work & the Hydropath technology behind it:
The difference between Hydropath Technology and other physical water conditioning technologies is the induced signal and its ability to continuously condition the liquid solution throughout an entire system. This process treats fluids by inducing a robust yet harmless signal of 150kHz throughout plumbing systems made of any material. The pipe, and/or the fluid inside of it, acts as a conduit which allows the signal to propagate. The induction of the signal prevents scale and biofilm from accumulating inside plumbing systems and gradually removes existing deposits. This preventative action significantly reduces energy, chemical, water and maintenance costs which extends the service life of equipment and pipes.
The electric induction is performed by a special transducer connected to a ring of ferrites. Just as an electrical wire carries current from point A to B, the water inside the pipe acts as a conductor and carries the induced electric signal throughout the entire water system. The oscillating sine waves of the induced AC signal cause the positively and negatively-charged ions to form suspended crystals in the water, preventing them from attaching to surfaces. Testing shows that compared to other technologies, Hydropath Technology is many times more efficient and effective.
HydroFLOW Canada has a full range of water conditioners providing a chemical-free solution for the harmful effects of scale, corrosion, bacteria, and algae. These durable water conditioners are fully encapsulated and water-resistant. Designed for ease of installation, the unit is simply built around the pipe and connected via the power supply unit. Various-sized units fit pipes of all sizes.
How Hydropath technology acts as a descaler
Hydropath technology powers the HydroFLOW devices which are highly efficient, non-intrusive electronic descalers that are installed on the water pipe entering your home or business. It treats fluids by inducing a robust yet harmless signal of 150kHz throughout plumbing systems made of any material, including PEX and PVC.
These electric waves cause mineral ions to form suspended clusters that turn into stable crystals when temperature or pressure changes occur. The suspended crystals will prevent scale from building up in pipes and on heating elements, thus increasing heat transfer efficiency, lowering maintenance costs and reducing chemical usage. Standard applications include plumbing systems, heat exchangers, water heaters, boilers, cooling towers, belt filter presses, wells and pumps. Popular sectors include residential, commercial, industrial and agricultural.
Unlike other products that treat liquids at a single point in a system and whose impact starts to diminish immediately after that point, HydroFLOW provides continuous water conditioning - ensuring a consistent and ongoing effect. Also, due to its unique, non-intrusive design, HydroFLOW doesn’t add any chemicals to your water supply while inhibiting pipe corrosion and eradicating bacteria and algae. Furthermore, while it protects your plumbing and appliances, it is also easy to install, requires no maintenance or wasted real estate. A residential grade HydroFLOW device costs about $1 in electricity per year. An industrial grade HydroFLOW device costs between $10 to $20 in electricity per year.
How scale is prevented with Hydropath technology
Minerals such as calcium carbonate, the mineral primarily responsible for limescale formation, are dissolved in the solution as TDS (Total Dissolved Solids).
When temperature or pressure change occurs, minerals percipitate out of solution and accumulate as hard scale in pipes, in holding tanks and on heating elements.
When the Hydropath signal is present, the dissolved minerals combine to form loosely held clusters.
When the clusters precipitate out of solution due to a temperature or pressure change, they form stable calcite crystals that do not accumulate as hard scale on the inner surface of pipes, holding tanks or heating elements. This results in the effective prevention of limescale buildup and eliminates the need for a water softener.
How existing scale is removed with Hydropath technology
As mentioned above, Hydropath technology treats fluids by inducing a robust yet harmless signal of 150kHz throughout plumbing systems made of any material, including PEX and PVC. When the Hydropath signal is present, dissolved minerals combine to form loosely held clusters.
When the clusters precipitate out of solution, they form stable calcite crystals that do not accumulate as hard scale.
However, with Hydropath technology, when the clusters precipitate out of solution, they form stable calcite crystals that do not accumulate as hard scale. Since hard scale no longer accumulates, liquid flowing in the pipe contributes to the removal of existing scale deposits.
The cost of scale
It’s important to understand that scale buildup in pipe systems, heating and cooling elements, and appliances come at a significant cost. First of all, it compromises energy-efficiency. In fact, in water heating and cooling systems, a quarter of an inch of scale buildup results in a 38 percent loss of efficiency - and that means your energy bills increase substantially.
Also, limescale buildup in pipe systems can damage the pipes and cause leaks. The resulting costs of repairing or replacing the pipe system can be substantial. Furthermore, depending on where the leak or leaks were located, there can be severe water damage to the building, including mold growth.
Limescale buildup can also shorten the life of appliances such as dishwashers, washing machines, coffeemakers and more. Scale buildup on heating elements, as well as on other parts of the appliances, can damage components, leading to costly repairs and shorter functional life.
HydroFLOW protects your property
Even though most of us aren’t usually aware of a problem like scale buildup, it’s an issue that comes at a considerable cost. HydroFLOW is specifically designed to protect you against these costs by not only preventing scale buildup but also removing any existing scale.
HydroFLOW can be used to protect a range of residential applications, such as water heaters and appliances, as well as pools and spas. When it comes to commercial and industrial applications, it can be used for cooling towers, chillers, filtration systems, water features, steam boilers, belt filter presses, heat exchangers and more.
Want more information about HydroFLOW and non-intrusive electronic descaling? Contact us today for answers to all your water treatment questions.
Foodservice video animation
Brackets for custom units
Canadas Statement of Qualifications:
Read more about the HYDROPATH technology on hydropath.com